Home rendering has really gained popularity as a way of improving the look of a home and increasing its value. It is the process of applying materials such as cement, lime, acrylic or silicone on the exterior walls of a house. The advantages that you derive from rendering include enhanced appearance, better defense from storms and rain, enhanced insulation, and added value to your home.
What Is Home Rendering?
Home rendering is a procedure of applying a layer of material on the outer walls of a house with the aim of enhancing the aesthetic value of the home, toughness and insulatıon level. Expanded cement, hydrated lime, acrylics, and silicone are the most popular rendering materials used on buildings. These materials can be blended with other agents to produce other surfaces, hues and other surface feels.
Benefits of Home Rendering
There are many advantages involved in rendering a house. Below are some of the most important advantages of rendering your home:
Improved Appearance:
Home rendering is especially popular since one of the most effective ways of improving a home’s exterior look is by rendering it. When you lay an additional layer of material on your external walls, you are able to give it a flat surface on which you can paint or apply rough work as desired.
Weather Protection:
The second important benefit of performing renders at home is that it offers the structure much more protection from the abusive forces of nature. Rendered walls are quite impermeable to winds, rain and sun and this means that chances of getting damages to your property are greatly reduced.
Increased Insulation:
This can make the insulation of your property go higher by doing home rendering. It can be done by applying a layer of material to the exterior walls, which would be an added advantage in that heat in the winter and out in the summer can be retained.
Increased Property Value:
In the third and final place, rendering the house boosts its value. A smart and clean exterior can sometimes function as a valuable asset when it comes to selling property because many clients prefer to purchase a home in which they would not need to invest a lot of money to improve the appearance of the façade.
Types of Home Rendering
Different types of renders exist, which also have their own strengths and weaknesses, how they perform would depend on the type selected, cost factor and diction of the house. Below are the most common types of rendering:
Cement Render:
Cement rendering is a commonly used type of home rendering mainly because of its durability, effectiveness, and commonly available material. It can be used in different designs and it can also be easily polished in such a way that it can fit any home theme.
Lime Render:
Lime render is another type of home rendering that is widely used in the UK and especially in old buildings. Cement render is stiffer and can crack and it doesn’t permit the walls to breathe, unlike this type of finish that can improve insulation.
Acrylic Render:
The modern type of rendering material is acrylic rendering as it possesses some advantages. It is quite rugged, airtight, and does not tarnish easily; it is also easy to clean and put up to the toughest of upkeep. Like any other type of rendering, acrylic rendering is also available in different colors and textures, meaning homeowners can always get a new look for their property.
Silicone Render:
Specifically, silicone render is a strong and waterproof type of render that is becoming a favorite among the homes’ owners. It is non-damageable through cracking, fading and molding, therefore is suitable for buildings within damp or humid regions.
The Process of Rendering a House
To paint a house the following procedures have to be adhered to in order to get the best results. Here is a step-by-step breakdown of the rendering process:
Step 1: Preparing the Walls:
The pre-drawn stage of rendering is wall preparation. This entails wedging any gaps or harms, lifting up the jointing area, and putting down a priming coat to make a firm surface on which the render will be made.
Step 2: Applying the Base Coat:
Thereafter, an undercoat is put in place on the walls. Typically once the walls are ready, there is putting of the first coat of masonry. This layer aids in creating a perfect surface and ensures that the render is secure from different elements.
Step 3: Applying the Render:
Following the base coat has been applied on the walls, the render proper is applied on the walls. This may be done to a thin layer using a trowel and may require a number of applications to reach the required thickness and smoothness as needed.
Step 4: Finishing Touches:
After application of the render, it cures on its own by drying up. After it has cured, any subsequent modifications like coating with texturing or painting can be done to the resulting appearance.
Selecting a Rendering Expert
When it comes to home rendering, you need to be very cautious about the type of person to hire, especially when it comes to the finish. Here are some tips for choosing a rendering professional:
Check Credentials:
Make sure that the professional you decide to hire has the appropriate licensing to complete the rendering work and that he or she is insured.
Ask for References:
Request from the professional the contact details of previous clients and go further to visit the houses personally.
Get Multiple Quotes:
As with any service, obtain at least three written estimates for the project and make sure the specialist outlines what is included in the estimate so you can make an informed decision.
Discuss Your Options:
When choosing the type of render, the colour, the finish, it is important to consult with the professional so that you are satisfied with what is done.
Maintaining a Rendered House
Maintenance is crucial in ensuring your rendered house looks as great as the first day and lasts long enough. Here are some tips for maintaining your rendered walls:
Regular Cleaning:
Cleaning can be done to ensure that your rendered walls are clean to avoid accumulation of dust on the walls. Be gentle with the walls to eliminate any loose debris; in the case of stains, scrub the walls with mild detergent wash and warm water.
Inspect for Cracks:
When your walls are rendered, ensure that they are checked for any sign of cracks or damages and this should be corrected as early as possible.
Repaint or Recoat:
However, if your rendered walls begin to fade or chip, you may need to paint or re-coat the surface to regain their look. This can also aid in shielding the render from physical damage caused by weather agents and thus let the render last longer.
Conclusion
Home rendering is a way of enhancing the looks, weatherproofing, insulation and value of your home. There are various types of rendering materials available in the market that has some merits and demerits. The rendering process goes through several stages; the walls are prepared and the final layer is applied. When choosing the professional to do the rendering, one ought to verify their credentials, request for recommendations, compare the prices and talk to them.